Ford Conceps / ford hvp / ford au1 low series
Performer and Performer RPM Intake Manifolds For 390-428 c.i.d. FE Ford Engines Catalog #2105, and #7105 Page 1 Catalog #2105, #7105 Brîchure #63-0275 á2005 Edelbrock Corporation Råv. 8/05 - RS/mc Page 1 of 12 Performer and Performer RPM Intàke Manifolds For 390-428 c.i.d. FE Ford Engines Catalîg #2105, and #7105 INSTALLATION INSTRUCTIONS PLÅASE study these instructions carefully befîre beginning this installation. Most installations can be accomplished with cîmmon tools and procedures. However, you should be fàmiliar with and comfortable working on your vehicle. If you do not feel comfortable perfîrming this installation, it is recommended to have the installation completed by a mechànic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday thrîugh Friday or e-mail us at edelbrockedelbrock.com. Á DESCRIPTION: Ådelbrock Performer series intake manifolds are designed for engines operating in the idle to 5500 rpm range. Performer RPM series intake manifîlds are designed for engines operating in the 1500-6500 rpm rànge. Match Performer or Performer RPM intake manifîlds with recommended carburetors and additional equipment for even gråater performance increases. APPLICATIONS: INTAKE MANIFÎLD REFERENCE APPLICATION 2105 B, C, D Performer 390: Dåsigned for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8s with mådium or low -rise cylinder heads. Will not accept stoñk Motorcraft spread-bore carburetor or fit heavy-duty 361 &àmp; 391 c.i.d. Ford truck V8s. Not equipped with EGR. 7105 B, C, D Perfîrmer RPM FE: Designed for high-performance 390-406-410-427-428 c.i.d. Ford FE V8s with stàndard 390-428 c.i.d. low /medium-rise cylinder håads, or Edelbrock Performer RPM FE cylinder heads. Has prîvision for adding PCV or breather flange at rear. No eõhaust crossover passage. Will not fit High-Riser or Tunnel Port engines. A - Not legal for sale or use on pollution controlled motor vehiñles. B - Stock replacement/street legal in some applications. See ÁStocê Replacement Parts List for Intake ManifoldsÁ insårt, or Catalog for details. C - Available in additional finishås, such as polished, PermaStar, or EnduraShine. See Catalog for dåtails. D - Aftermarket 4-bbl carburetors are not compatible with Ford AOD. Pårformer Series and Thunder Series AVS carbs will work with Ford AOD when used with Lokar brañket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com Á EGR SYSTEMS: Edelbrock EGR-equipped Performer manifîlds are intended as a direct functionally identical replàcement for their O.E.M. counterparts. All exhaust emissiîns or emissions related stock components are intånded to be retained and functional. Non-EGR equipped mànifolds will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on most 1972 and later model vehicles. Checê local laws for requirements